Ring Pulls, Security & Slide Bolts

If you plan to use your shutters you should consider adding ring pulls and slide bolts to your shutters.

Ring Pulls make it simple for you to reach outside your window, whether it's on the first story or the third story, and pull your shutters closed. Our ring pulls are made from wrought iron.

Slide Bolts then allow you to lock your shutters closed. This is something which is vitally important if you plan to use your shutters for security or storm protection. The plate is made from wrought iron while the slide is made of wrought steel.

I plan to use my shutters for security and storm protection.

Bar Staples are used for securing shutters and doors with 2x4 lumber. This is something you should seriously consider using if you plan to use your shutters for security or protection from severe weather. Click here to see the bar staples in the photograph at right.

Plastic ring pulls and plastic slide bolts are used for decorative use only. Our plastic shutter hardware can give authenticity to your decorative, non-functional vinyl and wood shutters.

Our steel ring pulls and slide bolts have a special phosphate coating to prevent rust
and are then finished in the traditional matte black.

Description	Cost
Ring Pull with Plate Item # HE2-770	$19.80 per pair
Ring Pull with Pin Item # HE2-750	$8.90 per pair
Slide Bolt with round ends Item # HE2-607	$31.25 each
Slide Bolt with square ends Item # HE2-707	$32.90 each
Plastic Ring Pull Item # HE5-401	$4.99 per pair
Plastic Slide Bolt with round ends (Victorian) Item # HE5-501	$7.99 per set
Plastic Slide Bolt with square ends (Colonial) Item # HE5-502	$7.99 per set

Exterior Shutter Hinges

Shutter Dogs, Tie-backs and Hold-backs

Interior Shutter Hinges

Decorative Plastic Hardware

| Home | Contact Us | FAQ's |

Kestrel Shutters logo - American Kestrel

Kestrel Shutters & Doors, #9 East Race Street, Stowe, Pennsylvania 19464 USA

800.494.4321 or 610.326.6679 FAX 610.326.6779

sales @ diyshutters.com