| |
|
Door Thickness
- 1.1/4" (standard)
- 1.3/8"
- 1.3/4"
- Custom
|
|
Wood Species
- Basswood (standard on interior doors)
- Spanish Cedar (standard on exterior doors)
- Honduran Mahogany (interior or exterior)
- African Mahogamny (interior only)
- White Oak (interior only)
- Red Oak (interior only)
- Cherry (interior only)
- Hard Maple (interior only)
- Soft Maple (interior only)
- Knotty Alder (interior only)
Pattern grade and Quarter Sawn wood is available with some species.
|
|
Finishing
We offer our doors unfinsihed as well as primed, painted and stained. Custom color matching is available on paint and stain finishes as is tinted priming.
|
|
|
Arch Top Doors
All of our doors are available with arched tops. We build your doors with your choice of half round, quarter round, eyebrow and gothic arch.
|
|
|
Custom Rail Location
The center rails (lock rails) on our doors are placed so that approximately 60% of the door is above the rail and 40% below. We can place the rail at most any location or remove it entirely.
|
|
Custom Stile & Rail Dimensions
We are able to build doors to your specifications should you need specific stile and rail dimension.
|
|
Center Stiles
Kestrel doors can be made with one or more center stiles. On doors over 36" wide we recommend a center stile.
|
|
Door Jambs
Custom sized door jambs are avaialbe assembled and in DIY kit form with and without hinge mortising.
|
| |
|
Options for Louvered Doors
|
|
Louver Width
- 2.1/2" Plantation louvers
- 1.7/8" Traditional louvers
- 3.1/2" Californian louvers
- Custom
|
|
Louver Type
- Fixed louvers (standard)
- Operable louvers
- False louvers (no air flow)
- Vertical louvers are available for each of the above louver types
|
|
Louver Profile
- Flat with rounded edges (standard)
- Tapered
- Trapezoidal
- Chevron (false louvers)
- Custom
|
|
Louver Spacing
Should you require a minimum or maximum air flow through your louvered doors just let us know.
We can modify the spacing of our fixed and operable louvered doors to meet your requirements.
|
| |
|
Options for Panel Doors
|
|
Panel Profile
- Colonial Raised Panel (standard)
- Flat Panel w/ trim
- Traditional Raised Panel w/out trim
- Traditional Raised Panel w/ trim on the reverse
- recessed Philadelphia Federal Panel
- Custom
|
|
Panel Cutouts
We offer several standard panel cutout designs and can also match your own designs.
|
|
Double Sided Panels
While most of our doors have the panel profile on one face only they can be made with the back identical to the front.
|
|
|
| |
|
Options for Tongue & Groove& Doors
|
|
Tongue & Groove Direction
- Vertical (standard)
- 45 degrees one direction
- 45 degree Herringbone
- Custom
|
|
Tongue & Groove Board Width
Our standard tongue & groove board widths are 2" on the face but can be customized to meet your needs.
|
| |
|
Options for Fabric Doors
|
|
Fabric Panels
We offer a selection of hand printed, painted, dyed and appliquéd panels as well as plain duck material. You can also use your own material or have our artist work with you on your own custom design.
|
|
|